Home Customer support center

Hello and thank you for choosing the Creatr HS for your printing needs. If you hear strange noises on the Y-axis movement of your Creatr HS there ar...

You may find yourself in the rare circumstance where you will need to replace the print head housing on your Creatr HS. If that's the case, don't wo...

Hello and thank you for choosing the Creatr HS for your printing needs. The following solution will instruct you on how to replace the Y stepper mot...

Hello and thank you for choosing the Creatr HS for your printing needs. If the printing head moves in the opposite direction when you use the Y and/...

Hello and thank you for choosing Leapfrog 3D for your printing needs.  Please note that this procedure only applies for the Creatr HS/HS XL and Crea...

If it is the case that you have to replace the motherboard of your Creatr HS, please follow these instructions step by step. Tools: a ...

Hello and thank you for choosing the Creatr HS for your printing needs. If you encounter problems with the Z movement of the print bed you have to c...

Thank you for choosing the Creatr HS/HS XL for your printing needs. Please note that this solution applies to both printer types. This solution will ...

Hello and thank you for choosing the Creatr HS for your printing needs. If you see the screws at the end of the Y shaft mounting bracket move...

Hello and thank you for choosing the Creatr HS for your printing needs. If you notice the X assembly belt is loose and is vibrating while you are pr...