Repair Instructions
Software solutions focusing on the Leapfrog Creatr HS 3D Printer and Simplify3D
Hello and thank you for choosing Leapfrog 3D printers for your printing needs;
Please note the following solution also applies to the Creatr HS, C...
Wed, 31 Aug, 2016 at 8:19 AM
Hello and thank you for choosing the Creatr HS for your printing needs.
If your bed does not reach the temperature value you have set in the g-code,...
Thu, 7 Apr, 2016 at 9:24 AM
It may happen that in some cases the 3D printed fan duct can melt when coming in contact with the extruders and will need to be replaced.
In...
Thu, 7 Apr, 2016 at 9:25 AM
Hello and thank you for choosing the Creatr HS for your printing needs.
The following solution will instruct you on what to check when you see your ...
Thu, 3 Mar, 2016 at 2:07 PM
"My Leapfrog Creatr HS Printer is not Connecting to the PC Even After the Software and Firmware Update. What do I do?" Hello and thank you for ch...
Wed, 11 Mar, 2020 at 9:00 AM
Hello and thank you for choosing the Creatr HS for your printing needs.
If you notice your 3D printer stops randomly during printing please follow t...
Thu, 3 Mar, 2016 at 2:21 PM
Here's a quick "hack" to those of you that would like to lower your Creatr HS series printer print bed and move your print head out of the way...
Mon, 15 Feb, 2016 at 2:48 PM
Hello and thank you for choosing the Creatr HS for your printing needs.
In the following solution you will be presented on what drawbacks can appear...
Mon, 25 Apr, 2016 at 12:15 PM
The Leapfrog Creatr HS is equipped with a total of 3 Thermistors: - Left Extruder (T1 Temperature Identifier) - Right Extruder (T0 Temperature Identifi...
Mon, 15 Mar, 2021 at 10:09 AM