This solution article will explain how to set-up the printer as a 'Custom FFF printer' in Cura. Cura is a free slicer that can be used on your computer. This tutorial is compatible with Cura 4.5 and possible newer.
Step 1: Download Cura Download link
Step 2: Add a printer and choose "Custom" and then "Custom FFF printer"
Step 3: Please fill in the parameters listed below.
Leapfrog Xeed
Printer
X (Width): 220mm
Y (Depth): 280mm
Z (Height): 230mm
Build plate shape: Rectangular
Origin at center: Disabled
Heated bed: Enabled
Heated build volume: Disabled
G-code flavor: Marlin
Printhead Settings
X min: -60mm
Y min: -30mm
X max: 60xmm
Y max: 80mm
Gantry Height: 2mm
Number of Extruders: 2
Shared Heater: Disabled
Start G-code Left Extruder (T1)
G32
G28 Y0 F600
G28 X0 F600
G28 Z0 F600
T1 ; switch to back extruder
G1 Z0.2 ; raise nozzle
G92 E0 ; zero extruder
G1 E3 F225 ; purge nozzle
G1 Y200 Z0.05 F1200 ; slow wipe
G1 Y195 Z0.25 ; lift
G92 E0 ; zero extruder again
Start G-code Right Extruder (T0)
G32
G28 Y0 F600
G28 X0 F600
G28 Z0 F600
T0 ; switch to front extruder
G1 Z0.2 ; raise nozzle
G92 E0 ; zero extruder
G1 E3 F225 ; purge nozzle
G1 Y200 Z0.05 F1200 ; slow wipe
G1 Y195 Z0.25 ; lift
G92 E0 ; zero extruder again
End G-code
M104 S0 T0 ; turn off front extruder
M104 S0 T1 ; turn off back extruder
M140 S0 T0 ; turn off heated chamber
G1 Z250 F1200 ; drop bed
G28 X0 ; home X axis
M84 ; disable motors
Extruder 1
Nozzle size: 0.35mm (standard)
Compatible material diameter: 1.75mm
Nozzle offset X: 0mm
Nozzle offset Y: 0mm
Cooling Fan Number: 0
Extruder 2
Nozzle size: 0.35mm (standard)
Compatible material diameter: 1.75mm
Nozzle offset X: 0mm
Nozzle offset Y: 0mm
Cooling Fan Number: 0