This solution article will explain how to set-up the printer as a 'Custom FFF printer' in Cura. Cura is a free slicer that can be used on your computer. This tutorial is compatible with Cura 4.5 and possible newer.
Step 1: Download Cura Download link
Step 2: Add a printer and choose "Custom" and then "Custom FFF printer"
Step 3: Depending on Creatr or Creatr XL please fill in the parameters listed below.
Leapfrog Creatr
Printer
X (Width): 230mm
Y (Depth): 260mm
Z (Height): 200mm
Build plate shape: Rectangular
Origin at center: Disabled
Heated bed: Enabled
Heated build volume: Disabled
G-code flavor: Marlin
Printhead Settings
X min: -66mm
Y min: -52mm
X max: 66mm
Y max: 90mm
Gantry Height: 2mm
Number of Extruders: 1 or 2 (dual)
Shared Heater: Disabled
Start G-code
G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0
End G-code
M104 S0
M140 S0
;Retract the filament
G92 E1
G1 E-1 F300
G28 X0 Y0
M84
Extruder 1
Nozzle size: 0.35mm (standard)
Compatible material diameter: 1.75mm
Nozzle offset X: -33mm
Nozzle offset Y: 0mm
Cooling Fan Number: 0
Extruder 2
Nozzle size: 0.35mm (standard)
Compatible material diameter: 1.75mm
Nozzle offset X: 0mm
Nozzle offset Y: 0mm
Cooling Fan Number: 0
Leapfrog Creatr XL
Printer
X (Width): 230mm
Y (Depth): 260mm
Z (Height): 600mm
Build plate shape: Rectangular
Origin at center: Disabled
Heated bed: Enabled
Heated build volume: Disabled
G-code flavor: Marlin
Printhead Settings
X min: -66mm
Y min: -52mm
X max: 66mm
Y max: 90mm
Gantry Height: 2mm
Number of Extruders: 1 or 2 (dual)
Shared Heater: Disabled
Start G-code
G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0
End G-code
M104 S0
M140 S0
;Retract the filament
G92 E1
G1 E-1 F300
G28 X0 Y0
M84
Extruder 1
Nozzle size: 0.35mm (standard)
Compatible material diameter: 1.75mm
Nozzle offset X: -33mm
Nozzle offset Y: 0mm
Cooling Fan Number: 0
Extruder 2
Nozzle size: 0.35mm (standard)
Compatible material diameter: 1.75mm
Nozzle offset X: 0mm
Nozzle offset Y: 0mm
Cooling Fan Number: 0